WEG CFW08 Variable Frequency Drive, 230 VAC, 16 Amps, 3-Phase, 5HP, NEMA 4X

Description

Description
The WEG CFW08 series of drives feature the compact size of a microdrive with the full functionality of much larger drives. From extensive programmable control features to flexible mounting and display options, the CFW08 has everything one needs in a small, reliable drive package.
The WEG CFW08 WASH Series is a redesign of our successful uline VFDs. Engineering improvements have produced one of the most compact and full featured microdrives in the marketplace.
Outstanding features and options in a NEMA 4 enclosure allow the CFW08 WASH to be successfully used in a large variety of washdown applications.
Overview
Brand
WEG
Catalog Number
CFW080160TDN4A1Z
Input Power
Three Phase - 230V
Motor
5 HP @ 230 V
Nominal Drive AMPS
16
Braking Transistor
Yes
Frame Size
A
Dimensions (H x W x D)
10.4” x 6.5“ x 8.5“
Approximate Shipping Weight
5 lbs
Enclosure
NEMA 4X
UPC
7894171786862
Standard Features
V/Hz and Sensorless Vector Control
150% current overload capacity
16 bit DSP controlled PWM output
2.5 / 5 / 10 / 15 kHz adjustable swiching frequency
Four isolated programmable digital inputs
Two programmable relay outputs (1NO, 1NC, 240VAC 0.5 Amp
Two isolated programmable analog inputs (0-10V, 0/4-20mA)
Protective features:
Over current
motor overload
drive over temperature
output phase-to-phase and phase-to-ground short circuit
DC bus over and under voltage
external fault
Control features:
Linear and "S" ramp acceleration and deceleration
local/remote control
DC braking
torque boost
motor slip compensation
electronic pot
preset speeds
adjustable V/Hz profile
maximum and minimum adjustable frequency limits
two skip frequencies
adjustable output current limit
JOG, ride-thru
flying start and PID regulator
Display readings:
Motor speed
frequency
voltage
current
last fault
heatsink temperature
drive status
Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300ft (1000m) altitude, 90% Humidity, Non-condensing
SuperDrive (G1) Compatible
Technical Data
Power Supply
Three Phase 200-240V (+10% / -15%)
Frequency
50 / 60 Hz +/-2 Hz
Cos (Displacement Power Factor)
Greater than 0.98
Enclosure
NEMA 4
Control Modes
V/Hz (Scalar)
Sensorless Voltage Vector (VVW)
Power Output
Sinusoidal PWM (Space Vector Modulation)
IGBT Transistors
Switching Frequency
2.5, 5, 10 or 15kHz
Frequency Range
0-300Hz
Overload Capacity
150% during 60 seconds, once every 10 minutes
Control Inputs
4 programmable isolated digital inputes, NPN or 24VDC logic (PNP)
2 x programmable differential analog inputs, programmable for current or voltage
Can be set as DI or as PTC input (0-10V, 4-20mA or 0-20mA)
Control Outputs
2 programmable relay outputs, one NO (Form A) and one NC (Form B): 250V /0.5A
1x outputs with independent NO and NC at the same common
1x output, programmable for voltage (0-10v) or current (0-20mA or 4-20mA) and with 0.25% linearity error
Communication
Serial: Optional RS-232 Serial Interface, RS-485 with external RS-232/485 Converter
Fieldbus: Modbus RTU with external RS-232/485 Converter
Protections
Motor Over-Current
Motor Overload
Output Phase-to-Phase short circuit
Output Phase-to-ground short circuit
Programming Error
DC Link over voltage
DC link under voltage
Drive over temperature
External Fault
Ambient Temperature
32-104°F (40°C)
up to 122°F (50°C) with 2% /1.8°F (1°C) output current derating
Humidity
5-90% Non Condensing
Altitude
0-3300ft (1000m)
up to 13,200ft (4000m) with 10% /3300ft (1000m) output derating
Regulatory Conformance
EMC Directive 89 / 336 / EEC
ENC61800-3
LVD 73/23/EEC
UL508C
Special Functions
Linear and “S” ramp accel and decel
local/remote control
FWD/REV selection
DC braking
manual and auto torque boost
motor slip compensation
electronic pot
two skip frequencies
maximum and minimum adjustable frequency limits
adjustable output current
PID Controller
Keypad
4 Digit display
2 indicator LEDs
8 keys
Keypad Readouts
output frequency (Hz)
output current (A)
output voltage (V)
motor torque (%) in vector mode
DC bus voltage (V)
value proportional to frequency
heatsink temperature
fault
status messages
Mounting
Surface Mounting with Screws
Applications
Pumps
Fans
Blowers
Conveyors
Rollout Tables
Agitators
Mixers
Any Washdown Applications
About this Product
Main Characteristics
Output current from 1.0 to 33 A (0.25 to 20 cv)
Single or three-phase power supply
Supply voltage from 200 to 480 V1)
Vector (VVC) or scalar (V/F) control
Accessories to expand functionalities
Standard, Plus or Wash Versions (IP66/NEMA 4x)
Multipump control
Built-in operating and programming interface (HMI)
Brake IGBT
Internal (optional) or external (accessory) RFI filter
Fault or alarm diagnosis
Optional items for CANopen, DeviceNet, RS485 and RS232 industrial communication networks
Remote operating interface - HMI (optional)
Free SuperDrive programming software
Applications
Multimotors and multipumps
Centrifugal pumps
Process dosing pumps
Fans / exhausters
Stirrers / mixers
Extruders
Conveyor belts
Roller tables
Granulators / pelletizers
Dryers / rotary ovens
Rotary filters
Winding machines / uncoiling machines
Cutting and welding machines
Special Functions and Resources
Password to enable programming
Fault self-diagnosis and auto-reset
Indication of specific quantity (programmable) - (e.g.: m/min, rpm, among others)
Slip compensation (V/F control)
Adjustable quadratic and linear V/F curve
Self-tuning routine (sensorless vector control)
Dynamic braking
Momentary speed impulse function (Jog)
Copy of the setting via serial operating interface - HMI (copy function)
Linear and “S” type ramps
Independent acceleration and deceleration ramps
DC braking (direct current)
Multispeed function with up to 8 preset speeds
Selection of the direction of rotation
Overlapped PID control (automatic control of level, pressure, etc.)
Start with the motor spinning (flying start)
Rejection of critical or resonant frequencies (skip frequency)
Operation during momentary network faults (ride-through)
Communication protocols: Modbus-RTU, CANopen and DeviceNet
Multipump Control
The CFW08 version with multipump control board (A5 in the control board option in item 9 of the smart code) can control up to 4 pumps at the same time, keeping the output pressure constant, regardless of the flow demand. The CFW08 with multipump control board can also monitor the suction pressure and the source reservoir level, in addition to enabling the smart drive of the auxiliary pumps based on the running time.
Connectivity
Especially designed to integrate large industrial automation plants, the Fieldbus industrial communication networks provide advantages in the supervision, monitoring and control, generating high performance and great operating flexibility - ideal for applications on complex or integrated systems. The CFW08 can be interconnected to the industrial networks with worldwide used protocols: CANopen, DeviceNet, Modbus-RTU and Profibus-DP.
a