New ABB PSR45-600-11 Softstarter 100-240V

Description

ABB PSR45-600-11  SOFTSTARTER
New, unused surplus.
Description
PSR45-600-11 - ABB PSR45-600-11, PSR SSTR,600V/24V AC/DC,46.2A
The PSR range is the most compact of all ABB's softstarter ranges. The compact PSR range makes it possible to fit many devices into the same enclosure. A PSR together with a MMS (manual motor starter) makes up a far more compact starting solution than a Star-Delta starter, for instance. Flexible mounting PSR softstarters from 3 to 45 A are possible to mount on a DIN-rail, ensuring quick and easy mounting. Naturally, all sizes can be screw mounted.
Few settings
The setup of the PSR is easily done and confirmed using the three clearly marked potentiometers on the front.
Built-in by-pass for energy saving
The built-in by-pass on all sizes does not only save energy; it will also ensure the most compact ABB's softstarter design and reduce the installation time. Thanks to the reduced heat generation, the softstarter can be mounted inside high IP class enclosures.
Suitable for stopping pumps
Even without using torque control, the PSR range is designed to reduce water hammering. Compared to the direct stops of a Star-Delta starter or a DOL starter the PSR is superior. See the stop ramp with step-down voltage below.
System concept with manual motor starters
All PSR softstarter sizes can easily be connected to the corresponding manual motor starters from ABB by using the special designed connection kits. This makes both the mounting and the connection easier and will provide a very compact starting solution containing short circuit and thermal protection, isolation function and soft starter - everything that you need.
Product description
Wide rated operational voltage 208-600 V
Rated control supply voltage 24 V AC/DC or 100-240 V AC
Rated operational current 3-105 A
Wide ambient temperature range, -25 to +60°C
Built-in by-pass on all sizes, saving energy and reducing installation time
Potentiometer settings
Run signal relay on all devices
TOR signal relay on PSR25...PSR105
Optional fieldbus communication using Profibus, Modbus, Devicenet or CANopen
DIN rail mounting on PSR3...PSR45
Screw mounting on all sizes
Connection kits for easy connection with ABB's manual motor starters
Sophisticated algorithm eliminating the DC-component and thereby providing excellent starting performance