ARX Multi Q 6Ch. Multi-Mode Parametric Equalizer

Description

The Multi Q has six channels that each cover the complete audio spectrum, and each has its own Balanced Input and Output. Each channel also has controls for Frequency Select, with x 10 switch; Bandwidth, from three octaves through to 1/20th octave; Cut and Boost, up to + or -18 dB; and IN/OUT hardwire bypass switch. A clip LED indicates overload through all circuitry, and each channel has a numbered marker panel for easy confirmation of EQ assigns.
The Multi Q’s exclusive and unique Internal patching system allows access to six channels of parametric EQ, either individually or in multiples. The incoming signal at Channel 1 shall be normalled through all channels to the output of Channel 6, unless an output connector is plugged into another channel-Channel 3, for example, in which case another signal may be inserted into Channel 4. Thus the equalizer shall be capable of functioning as a 1,2,3,4,5 or 6 band parametric, or any combination thereof.
The Input headroom shall be +21dB, with a CMRR of better than 60dB, and the frequency response shall be 10Hz to 20kHz, ±0.5dB.
Features:
Input Impedance: Balanced 40kΩ, Unbalanced 20kΩ
Input Headroom: + 21dB
CMRR >60dB, 20Hz to 20kHz
Output Impedance: Balanced 300Ω, Unbalanced 150Ω
Output Level (Max): +21dB
Frequency Response: 10Hz to 20kHz, ±0.5dB
Signal to Noise ratio: Single Ch: -98dB Unweighted, -101 dB Weighted
Distortion: .004% THD , 0dB,1kHz
Dynamic Range: 119 dB, single channel